Hard Drive Model	M2263SA
Capacity	641  MB
Series	N/A
Form Factor	5.25" full height
Interface	SCSI2 SE

Re-Source Hardware are able to look at and repair in most instances this type of hard drive. If you have a drive (model M2263SA) that requires hard disk repair or data recovery in Australia, please go to our Fujitsu hard drive repair page.

Specific reported (or experienced ) problems with this drive that may require hard drive repair or recovery of data include the following:

There are no specific reported failures with this hard disk drive

If you know of or have experienced specific problems with lost files or corrupted data with this type of drive, please report it by going to our contact page.

There may be many ways that a hard drive of this type may fail and require data recovery, due to external factors that can affect all hard drives. These may be many and varied. Some failures that may be experienced are as follows:

1. The drive may spin up properly, but not detect;

2. The drive may also not detect properly in BIOS;

3. Unusual noises coming from the drive (clicking, clunking , scraping);

4. The drive not spinning up or straining to spin up, but not being able to (this is marked by small whirring noises from within the drive but no spinning of the platters);

5. The drive may not just be functioning properly.

If your drive is experiencing any of these problems and you are in Australia, please contact us to enquire more about our services, or go to our data recovery costs page